Cochlear Nucleus CR110 Guide de l'utilisateur télécharger pdf (Page 27)

Turn the magnet in a clockwise direction until it is in position. 6.

Do not overtighten the magnet, or force it to turn if it becomes difﬁ cult

to turn during insertion or removal. The movement should be smooth

and turning should need only a small amount of force. If turning

becomes difﬁ cult, check that:

The magnet is correctly aligned in the coil.•

You are turning the magnet in the correct direction.•

Changing the coil cable

If you ﬁ nd that the coil cable is too long or short for your comfort, you

can change the coil cable. Regularly check to see if the coil cable is

damaged. If damaged, you will need a new coil cable.

To change the coil cable to a longer or shorter one, do the following:

Remove the coil cable from the processing unit as shown.

Place the thumb and index 1.

ﬁ nger over the ﬁ nger grips

on the processor end of the

coil cable plug as shown.

Gently pull the coil cable 2.

plug away from the

processor. Do not pull on

the coil cable, or twist/

rotate the coil cable plug.

Wearing your processor

195992 ISS6 CP810 User Guide 01.indd 25 14/10/2010 11:44:32 AM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 200 201

Pas de commentaire

Cochlear Nucleus CR110 Guide de l'utilisateur Page 27